Nitro RC Drift Cars: How to Care For and Maintain Them

Nitro RC Drift Cars: How to Care For and Maintain Them

Nitro RC drift cars require constant maintenance if they are to run at their best. Compared to electric models, they are a bit harder to maintain, because their engine is more delicate and so needs frequent cleaning. In addition, with some Nitro RC drift cars that have an oil reservoir you will also have to change the lubricating oil quite often. And then there's the regular changing of tires, but this is something that's done just as often with electric RC drift cars. Though extra work, all this maintenance will seem really like play if you're passionate about RC drift cars.
Basic Maintenance
New cars tend to be sturdy and equipped with good engines, meaning that they can normally run without requiring hours of weekly maintenance. However, to get the most of them you have to carry out a series of basic maintenance tasks, as often as you can.
The first of these tasks is cleaning the engine and then tuning it. The engine of Nitro cars is more delicate than of electric cars, and so needs more careful handling. Setting it right from the beginning and keeping the dirt away from it will be necessary.
Then you must consider the fuel. Nitro RC cars usually run on a mix of Nitro methane, methanol, and oil. Just like with real-size cars, using high-quality fuel is crucial if the engine is to run smoothly. You should be especially careful to use clean fuel, otherwise the engine may be damaged.
Next you must see that all moving parts are in perfect condition. Lubricate them regularly so that they will work smoothly. After a few drifting sessions check them to ensure that they're in a good condition. If you don't lubricate the moving parts or if they are not fixed properly, you may see the endurance of your cars decrease, or at worst the engine failure altogether. Also, note that each model may require specific maintenance tasks, so check your user manual.
Tires
RC drift cars require adequate tires to drift properly. Whenever you can afford it, buy manufactured drift tires because these make the car more controllable. Otherwise, make drift tires by yourself from ABS piping or PVC. ABS or PVC tires last for a short time, so changed them as often as possible, otherwise your car won't drift smoothly.
Chassis and Body


Good RC drift cars have a resistant chassis and body that requires little maintenance except cleaning with a cloth, brush, and warm water. Don't expose your cars to rain, snow, or direct sunlight. Also, don't deliberately crash your cars into other cars while drifting because even the sturdiest cars can be easily damaged. When it comes to aesthetic modifications, you should stick to paint and decals in the beginning. When you want to add LED light kits or wide body kits follow closely the instructions that come with the parts and wait for the glue to dry before starting a drifting session.

Article Source: http://EzineArticles.com/?expert=Carl_Davison